-Pegasus Series (Latest Printer Model)

The Pegasus Series is our latest series of printer, the aluminum frame and X Axis gives higher print quality then i3v series of printers.

3 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Pegasus 10" Kit

    Pegasus 10" Kit

    Regular Price: $475.00

    Special Price $430.00

    As low as: $344.00

    The Pegasus 10" kit is the latest addition to our set of full 3D printer kits.  The Pegasus printer uses OpenBuilds V-SLot Linear Rail which provides Smoother Operation at Higher Print Speeds and the frame is built from the same OpenBuilds V-Slot Extrusion for a rigid frame.  The Pegasus also comes with a Direct Drive Extruder and an E3D hot end.

    Standard 12 business day lead time (you order will leave our warehouse 2 business days after you have placed your order)

    This kit contains everything you need to build the 10" Pegasus except for a 12v 30 amp power supply, Insulation, usb cable, glass and a print surface like hairspray.  See page 4 of the build guide for specific links.

    The average builder can complete the Maker Farm 10" Pegasus 3+ hours from start to printing, Compare that to 5 hours for the Printrbot and 8 hours for the Deluxe V2 Prusa.

    Features:

    10"x10"x10" Build Envelope*
    RAMPS 1.4 Electronics
    50 micron layer height
    Heat bed & Heat Bed Relay
    GT2 Pulley's and Belts
    .40mm E3D-v6, E3D-Lite6 E3D Hot end for 1.75mm filament or E3D-v6 hot end for 3mm filament
    Pegasus Direct Drive Extruder (Optional Dual Extruder*) or Titan Extruder (works with 3mm or 1.75mm filament)
    66oz-in Motors for all axis' (Pre-Wired)
    Bed leveling kit
    V-Slot Extrusion (Higher print speeds and smoother operation)
    Every kit will now come with a Built in Spool Holder!
    Assembled dimensions 22"Wx20"Dx24"H (with spool of filament installed)
    Micro Adjustable Z Endstop
    Aluminum Heat Bed Mount
    Optional LCD Interface
    Slot Cover for Wire Management

    You will need basic hand tools, soldering iron, Piece of Glass, Insulation, Hairspray and Power supply (see links below) to complete your build

    Power Supply - Mean Well NES-350-12 12V 350 Watt Ul Switching Power Supply 110-240 Volt

    Insulation - 12 Inch x 12 Inch Cork Tile for Heat Bed Insulation

    Hair Spray - Extreme Hold and Control Anti-Humidity Hairspray 5 8.25 Ounce (6 Pack)

     Pegasus Build GuidePegasus Build Guide

     *Build area can vary depending on binder clip placement

    ^Dual Extruders double the complexity of the Extruder/hot end setup, they also double the potential problems you can have.  For the easiest and most simple printer get a single extruder setup.

     Extrusion may be Black, Silver or a mixture of both.

    Learn More
  2. Pegasus 8" Kit

    Pegasus 8" Kit

    Regular Price: $375.00

    Special Price $350.00

    As low as: $315.00

    Pegasus Video 1: Spiral Vase Video
    Pegasus Video 2: Emmett's Gear Bearing
    Pegasus Dual Extruder Video: Dragon Heart
     

    The Pegasus 8" printer kit uses OpenBuilds V-SLot Linear Rail which provides Smoother Operation at Higher Print Speeds and the frame is built from the same OpenBuilds V-Slot Extrusion for a rigid frame.  The Pegasus also comes with a Direct Drive Extruder and an E3D hot end.

    Standard 12 business day lead time (you order will leave our warehouse 2 business days after you have placed your order)

    This kit contains everything you need to build the 8" Pegasus except for a 12v 30 amp power supply, Insulation, usb cable, glass and a print surface like hairspray.  See page 4 of the build guide for specific links.

    The average builder can complete the Maker Farm 8" Pegasus 3+ hours from start to printing, Compare that to 5 hours for the Printrbot and 8 hours for the Deluxe V2 Prusa.

    Features:

    8"x8"x7" Build Envelope*
    RAMPS 1.4 Electronics
    50 micron layer height
    Heat bed  
    GT2 Pulley's and Belts
    .40mm E3D-v6, E3D-Lite6 E3D Hot end for 1.75mm filament or E3D-v6 hot end for 3mm filament
    Pegasus Direct Drive Extruder (Optional Dual Extruder) or Titan Extruder (works with 3mm or 1.75mm filament)
    66oz-in Motors for all axis' (Pre-Wired)
    Bed leveling kit
    V-Slot Extrusion (Higher print speeds and smoother operation) Extrusion may be Black, Aluminum or Mixed Black and Aluminum
    Every kit will now come with a Built in Spool Holder!
    Assembled dimensions 20"Wx18"Dx27"H (with spool of filament installed)
    Micro Adjustable Z Endstop
    Optional Aluminum Heat Bed Mount
    Optional LCD Interface

    You will need basic hand tools, soldering iron, Piece of Glass, Insulation, Hairspray and Power supply (see links below) to complete your build

    Power Supply - Mean Well NES-350-12 12V 350 Watt Ul Switching Power Supply 110-240 Volt

    Insulation - 12 Inch x 12 Inch Cork Tile for Heat Bed Insulation

    Hair Spray - Extreme Hold and Control Anti-Humidity Hairspray 5 8.25 Ounce (6 Pack)

    *Build area can vary depending on binder clip placement

    You can add two 375mm V-Slot Rails to your kit for additional support here: http://www.makerfarm.com/index.php/v-slot-linear-rail.html (Printed parts from the Pegasus Download and hardware will be required to mount)

    Extrusion will be Black

     

    Learn More
  3. 12" Basic Pegasus Kit

    12" Basic Pegasus Kit

    Regular Price: $710.00

    Special Price $645.00

    As low as: $516.00

    The 12" Pegasus 3D Printer Kit is the latest addition to our set of full 3D printer kits.  The Pegasus printer uses OpenBuilds V-SLot Linear Rail which provides Smoother Operation at Higher Print Speeds.

    12 Business Day Lead time (Your order will leave our warehouse 2 business days or less after you place your order)

    This kit contains everything you need to build the 12" Pegasus 3D Printer except for a 12v 30 amp power supply, Insulation, glass and a print surface like hairspray.  See page 4 of the build guide for specific links.

    Features:
    -Extremely Rigid 20x40 Aluminum Frame
    -11.5"(X)x12"(Y)x13.5"(Z) Build Envelope*
    -RAMPS Electronics Standard 
    -50 micron layer height
    -Graphical LCD Interface - Print without a PC
    -GT2 Pulley's and Belts
    -Genuine e3d .40mm Hot End Nozzle for 1.75mm Filament, Optional e3d-Lite6 or e3d-v6 for 3mm Filament.
    -66oz-in Motors for all axis' (Pre-Wired)
    -Bed leveling kit
    -V-Slot Extrusion (Higher print speeds and smoother operation)
    -Built in Spool Holder
    -Tool kit, (2 Wrenches & 2 Allens)
    -Assembled dimensions 21.25"x23"x23.5" (without spool of filament installed)
    -Micro Adjustable Z Endstop 
    -Heat bed with built in Relay
    -Aluminum Heat Bed Mount
    -Metal X, Y & Z Motor Mounts, Metal X Idler and X Carriage
    Looking for the Deluxe Upgrade Kit shown below?: http://www.makerfarm.com/index.php/12-deluxe-pegasus-upgrade-kit.html

    The 12" Deluxe Pegasus has the strongest and most rigid frame of any of our printers, now you can stack your printers, run them at high speeds without the frame flexing or as @pilatestrainerchick found out doing some Yoga while printing.

     

    You will need basic hand tools, soldering iron, Piece of Glass, Insulation, Hairspray and Power supply (see links below) to complete your build

    Power Supply - Mean Well NES-350-12 12V 350 Watt Ul Switching Power Supply 110-240 Volt

    Insulation - 12 Inch x 12 Inch Cork Tile for Heat Bed Insulation

    Hair Spray - Extreme Hold and Control Anti-Humidity Hairspray 5 8.25 Ounce (6 Pack)

     Build Guide

    Basic 12" Pegasus Build Guide

     

     

     

     

     

     

    *Build area can vary depending on binder clip placement, hot end or endstop.

    Learn More

3 Item(s)

per page

Grid  List 

Set Descending Direction