Spring Clearance Event

Items 1 to 10 of 20 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Wire for Fan - Clearance

    Wire for Fan - Clearance

    $0.10

    Out of stock

    580mm Length Wire for fan Learn More
  2. 4 Pin Molex Housing - Clearance

    4 Pin Molex Housing - Clearance

    Regular Price: $0.55

    Special Price $0.10

    4 Pin Molex Housing Learn More
  3. 3 Pin Molex Housing

    3 Pin Molex Housing

    Regular Price: $0.50

    Special Price $0.10

    3 Pin Molex Housing for the following items: Endstop Switches Learn More
  4. 608

    608 Bearing - Clearance

    Regular Price: $1.50

    Special Price $0.25

    608 Bearing 608 Bearings are used in all printers for the extruder and idler rollers for belts. If you are building a Prusa you will need 3 608 bearings for the Prusa and 3 for the Extruder. If you are building a v2 prusa with z stabilizers you will need 5 for the prusa and 3 for the extruder. Learn More
  5. SD Ramps - Clearance

    SD Ramps - Clearance

    Regular Price: $0.99

    Special Price $0.25

    Ever wanted to run your RepRap from SD card? Here is your chance! This RAMPS add-on enables you to print from MicroSD. With RAMPS 1.3 and higher it's easily connected to the RAMPS board. For more information, check this page: reprap.org/wiki/Sdramps NOTE: Kingston brand SD cards do not work as they do not support SPI. Learn More
  6. Lm8UU

    LM8UU Linear Bearing - Clearance

    Regular Price: $1.69

    Special Price $0.35

    Using Linear Bearings on your 3D Printer will give better quality prints and usaually easier builds. The v2 Prusa uses 11 LM8UU linear bearings, they snap into place so no gluing is required. The Printrbot uses 10 LM8UU linear bearings (11 recommended) Learn More
  7. 688ZZ Bearing - Clearance

    688ZZ Bearing - Clearance

    Regular Price: $1.19

    Special Price $0.45

    688ZZ Bearing, used in the "Itty Bitty Dual Extruder" and similar extruders OD 16mm x ID 8mm x 5mm Thick Learn More
  8. Micro USB Cable

    Micro USB Cable

    Regular Price: $1.95

    Special Price $0.50

    Micro USB Cable for Printrboard Learn More
  9. High Temperature wire 580mm - Clearance

    High Temperature wire 580mm - Clearance

    Regular Price: $2.00

    Special Price $0.50

    2 High Temperature Wires 580mm Long with a 4 Pin Connector Learn More
  10. High Temperature Pre-wired Thermistor Cable - Clearance

    High Temperature Pre-wired Thermistor Cable - Clearance

    Regular Price: $5.95

    Special Price $0.75

    2 High Temperature wires for Thermistor Pre-wired with 550mm Length Wires for Thermistor. Color of wires may vary. Learn More

Items 1 to 10 of 20 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction