Heat Beds

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. MK1 Heat Bed

    MK1 Heat Bed

    Regular Price: $15.50

    Special Price $12.50

    Heatbed MK1 

    Printing on a cold surface just doesn't work. We've tried, and so have thousands of other RepRap builders. ABS simply does not stick well to cold glass/acrylic/tape. Prusa's MK1 Heatbed is the popular solution (yes, from the same guy who designed the "Prusa" Mendel).

    The MK1 is easy to install: Solder two 12AWG wires to the MK1 and connect to your DC power supply. The board naturally pulls about 7-10A and heats to the stable temperature of 110C within minutes. You are responsible for obtaining and installing all wiring and mounting equipment as required by your specific RepRap.

    Learn More
  2. Cork Insulation

    Cork Insulation

    $3.50

    12" x 12" Square Cork Insulation Can be used for insulation under 8", 10" or 12" heat beds, easy to cut down to size. Learn More
  3. Auto Bed Leveling Kit

    Auto Bed Leveling Kit

    $9.95

    Out of stock

    Includes Induction Sensor, Voltage Reducer and wires Printable mount for i3v: https://app.box.com/s/gwqyo8n60k8fbvb88xytkj9fce9qoxc1 or https://drive.google.com/file/d/0B80A_woXoRWdR3kwTmVoQzNDOTg/view?usp=sharing

     

    Soldering is required, printed mount is not included Currently we do not have firmware or directions for installing or using ABL

    Learn More
  4. Aluminum i3v Heat Bed Mounts

    Aluminum i3v Heat Bed Mounts

    $24.00

    These Aluminum Heat Bed Mounts can replace the Wood Heat Bed Mounts in your i3v printer The Aluminum is extremely rigid and will not warp or flex when used without insulation or when painted. Learn More
  5. 6" x 8" Heat Bed

    6" x 8" Heat Bed

    $17.50

    New high quality Super Sized 6" x 8" Heatbed PCB , 12VDC input,

    Dimensions: 152mm x 203mm

    Hole spacing: 147mm x 198mm

    Wires come Pre-solderd.

    MADE IN USA.

    Learn More
  6. MK2B Aluminum Heat Bed 12v or 24v

    MK2B Aluminum Heat Bed 12v or 24v

    $28.00

    All features from MK2A and you also can operate this board now with 12v or 24v
    - a central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity
    - The pads to solder onto have been greatly increased as shown in the picture below. The picture shows the wires prepared for soldering routed through the holes for extra security. This does not remove the need to use proper strain relief. 


    Copper plated holes as shown in reprap wiki: http://reprap.org/wiki/PCB_Heatbed


    Tech specs heat bed MK2A

    • Dimensions 214mmx 214mm
    • Laminate FR4 1.6+-0.15mm
    • 2 layer, 35µm copper
    • Red Soldermask - both sides
    • White Silkscreen - both sides
    • Power Input: 12v or 24v
    • copper plated holes
    • resistance between 1.0-1.2 ohm (12V) - 3-3.4 ohm(24V)

     

    Tech specs for the EPCOS thermistor included in this set (this is the most popular thermistor used in reprap)

    Content of package:

    - 1 x MK2B Dual Power PCB
    - 1 x 100K ohm thermistor, un-soldered (all packed one by one in each one small bag)

    Learn More
  7. 4.65" x 7.25" Heat Bed - Printerbot Simple

    4.65" x 7.25" Heat Bed - Printerbot Simple

    $17.00

    New high quality Printerbot Simple Heatbed PCB (Wood Printerbot Simple) , 12VDC input,

    You may require some connectors to connect this to a printrboard.

    MADE IN USA.

    Learn More
  8. 4.65" x 10.8" Heat Bed - Printerbot Simple XL

    4.65" x 10.8" Heat Bed - Printerbot Simple XL

    $19.00

    New high quality Printerbot Simple XL Heatbed PCB (Wood Printerbot Simple XL) , 12VDC input,

    You may require some connectors to connect this to a printrboard.

    MADE IN USA.

    Learn More
  9. 12" x 12" Heat Bed

    12" x 12" Heat Bed

    $63.00

    New high quality Super Sized 12" x 12" Heatbed PCB , 12VDC input with built in Heat Bed Relay,

    WARNING! The large Heatbed draws more current than a standard size Heatbed, approximately 24+ amps at startup for a few minutes. It may require a separate 12VDC power supply.  

    Wires come Pre-solderd.

    MADE IN USA.

    Learn More
  10. Heat Bed Relay

    Heat Bed Relay

    $16.50

    This Heat Bed Relay will allow you to run larger heat beds that require more power then your electronics can supply.  This is perfect for the 8.4" x 12.6" Heat Bed, 10" x 10" Heat Bed, 12" x 12" heat bed and even help to heat up your 8" x 8" MK1 or MK2 quicker.

     

    Connect J2 to one heat bed wire and GND from your power supply.  Connect J1 In to 12v+ from your power supply and connect the other heat bed wire to J1 out, then connect the two small Pre-Soldered wires to your Heat Bed out put of your electronics (D8 for RAMPS)

    Learn More

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction