10" x 10" Heat Bed

10" x 10" Heat Bed

Be the first to review this product

Availability: In stock

$34.50

Quick Overview

New high quality Super Sized 10" x 10" Heatbed PCB , 12VDC input,


WARNING! The large Heatbed draws more current than a standard size Heatbed, approximately 17-18 amps at startup for a few minutes, then it will drop to 14-15 amps.. It will most likely require a separate 12VDC power supply.  If you plan on using a thermistor with your heat bed you will need to power your Heat bed via a Relay connected to your electronics since most electronics cannot output 18amps.


Wires come Pre-solderd.


Hole spacing is 249mm x 249mm (center of mounting hole to center of mounting hole)


MADE IN USA.

10" x 10" Heat Bed

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

$34.50
  • Details

    New high quality Super Sized 10" x 10" Heatbed PCB , 12VDC input,

    WARNING! The large Heatbed draws more current than a standard size Heatbed, approximately 17-18 amps at startup for a few minutes, then it will drop to 14-15 amps.. It will most likely require a separate 12VDC power supply.  If you plan on using a thermistor with your heat bed you will need to power your Heat bed via a Relay connected to your electronics since most electronics cannot output 18amps.

    Wires come Pre-solderd.

    Hole spacing is 249mm x 249mm (center of mounting hole to center of mounting hole)

    MADE IN USA.

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.