E3D Hot End Parts

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. Silicone Pro Socks for v6 - Pack of 3

    Silicone Pro Socks for v6 - Pack of 3

    $4.75

    A pack of 3x high temperature non-stick silicone socks for E3D-v6 and other hotends also using the E3D-v6 style heater block with thermistor cartridges. They will not properly fit the screw-washed clamped thermistor style E3D-v6 Block. These socks fit the new cartridge style thermistor blocks. To upgrade to the new block and thermistor, with 3x socks purchase the Block and Sock Kit 

    Read all about them in the Blog Post!

    • These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
    • Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
    • These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
    • The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm

    These v6 socks come in a pack of 3 because they don’t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.

    Learn More
  2. E3D-V6 .4mm nozzle for 1.75mm Filament

    E3D-V6 .4mm nozzle for 1.75mm Filament

    $12.00

    1 x E3D-V6 .4mm nozzle for 1.75mm Filament Learn More
  3. E3D-V6 .4mm nozzle for 3mm Filament

    E3D-V6 .4mm nozzle for 3mm Filament

    $12.00

    Out of stock

    1 x E3D-V6 .4mm nozzle for 3mm Filament Learn More
  4. Embedded Bowden Couplings - For Metal (3mm Filament)

    Embedded Bowden Couplings - For Metal (3mm Filament)

    $3.50

    These pneumatic fittings have a brass metal body which is designed to provide a simple and cost effective way of inserting bowden tubing directly into your aluminium components. The couplings are designed to take 1/4 Inch OD tubing and the brass inserts push into an 0.528 Inch hole 0.181 Inches deep. E3D apologises for the use of imperial units. These fittings are aimed at use within the 3mm Bowden v6 product, however there are plenty of other applications ready to be discovered. Learn More
  5. 50x50x15mm 12v DC Side Blow Fan

    50x50x15mm 12v DC Side Blow Fan

    $7.95

    Out of stock

    The standard 12v DC fan for general cooling needs. This is a high-speed fan with a high quality 2 ball bearing. 12 Volts DC Size: 50x50x15mm Lead lengh: 1m Learn More
  6. Threaded Bowden Coupling (1.75mm Filament) for E3D Hot Ends

    Threaded Bowden Coupling (1.75mm Filament) for E3D Hot Ends

    $3.50

    These high-quality pneumatic push-fit couplings have a 1/8"  thread and screw directly to the bowden heat sink or any printed parts you may have that need to be converted to take PTFE tubing. 

    For 4mm OD Tubing:

    Nominal Thread Size: 1/8" BSPT
    Thread Length: 4mm

    Learn More
  7. E3D Thermistor Cartridge

    E3D Thermistor Cartridge

    $6.95

    A custom made thermistor encapsulated into an easy to use cartridge package.

    Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs are insulated with fibreglass sleeving, and terminated with a Molex Microfit 3.0 connector.

    If you don't already have a Heater Block for Sensor Cartridges you can get one here: http://www.makerfarm.com/index.php/e3d-v6-heater-block-for-sensor-cartridges.html

    Includes: 
     1 x Thermistor Cartridge with Molex Connector

     1 x Wiring Harness with Molex connector

     

    Learn More
  8. Block & Sock - V6 Upgrade Kit

    Block & Sock - V6 Upgrade Kit

    $19.95

    Out of stock

    Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block. Read all about them in the Blog Post.

    • V6 cartridge-style heater block
    • Silicone Sock V6 (x3)
    • The new cartridge thermistor
    • Thermistor cable
    • Fixings

    Silicone Socks are also available in sets of 3!

    • These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
    • Made of a heat-resistant, non-stick silicone material that will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
    • These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
    • The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm
    • Socks don't last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.
    Learn More
  9. Silicone Socks for v6 - Pack of 3

    Silicone Socks for v6 - Pack of 3

    $4.75

    A pack of 3x high temperature non-stick silicone socks for E3D-v6 and other hotends also using the E3D-v6 style heater block with thermistor cartridges. They will not properly fit the screw-washed clamped thermistor style E3D-v6 Block. These socks fit the new cartridge style thermistor blocks. To upgrade to the new block and thermistor, with 3x socks purchase the Block and Sock Kit 

    Read all about them in the Blog Post!

    • These socks will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
    • Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
    • These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
    • The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm

    These v6 socks come in a pack of 3 because they don’t last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With less sticky materials like ABS and gentler use you can get almost infinite life. Your mileage may vary.

    Learn More
  10. v6 Extra Nozzle - Stainless Steel - 1.75mm x .40mm

    v6 Extra Nozzle - Stainless Steel - 1.75mm x .40mm

    $22.95

    Out of stock

    This nozzle is just like our other nozzles but is made of 303 Stainless Steel.

    These are not superior in performance to our brass nozzles, and will in fact give you ever so slightly lower printing speeds. These nozzles are exclusively for use with highly specialised materials that may corrode brass nozzles, or for applications where the tiny amount of lead present in the brass nozzles is not acceptable.

    Learn More

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction