E3D Hot End Parts

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Hot End Mounting Plate

    Hot End Mounting Plate

    $2.00

    This Hot End Mounting Plate will mount your Hot End under your Extruder Learn More
  2. v6 Extra Nozzle - Hardened Steel - 3mm x .40mm

    v6 Extra Nozzle - Hardened Steel - 3mm x .40mm

    $22.95

    Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

     

    If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

     

    We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

     

    Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

     

    Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!

     

    - See more at: http://e3d-online.com/E3D-v6/Extra-Nozzles/V6-Nozzle-Hardened-Steel-1.75mmx0.4mm#sthash.UdZ7Buwo.dpuf

    Learn More
  3. v6 Extra Nozzle - Hardened Steel - 1.75mm x .40mm

    v6 Extra Nozzle - Hardened Steel - 1.75mm x .40mm

    $22.95

    Out of stock

    Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

     

    If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

     

    We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

     

    Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

     

    Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!

     

    - See more at: http://e3d-online.com/E3D-v6/Extra-Nozzles/V6-Nozzle-Hardened-Steel-1.75mmx0.4mm#sthash.UdZ7Buwo.dpuf

    Learn More
  4. Embedded Bowden Couplings - For Metal (1.75mm Filament) (Collet)

    Embedded Bowden Couplings - For Metal (1.75mm Filament) (Collet)

    $3.50

    The couplings are designed to take 4mm OD tubing. These fittings are aimed at use within the Kraken, and are used in the v6 1.75mm hotends. However there are plenty of other applications ready to be discovered. Learn More
  5. E3d Thermistor Sleeve

    E3d Thermistor Sleeve

    $2.00

    E3d Thermistor Sleeve May be Grey or Blue Learn More
  6. E3d Fan 24v

    E3d Fan 24v

    $4.50

    24v e3d Fan 30mm Learn More
  7. E3d Fan 12v

    E3d Fan 12v

    $4.50

    12v e3d 30mm Fan Learn More
  8. E3d Heater Cartridge - 12v - 30w

    E3d Heater Cartridge - 12v - 30w

    $5.00

    Out of stock

    12v 30w Ceramic Heater Cartridge A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your hotend hot quickly and hit the highest of temperatures. Comes with a metre of sillicone insulated high temperature wire. Length: 19mm Diameter: 6mm LeadLength: 1000mm Learn More
  9. V6/Lite6 Injection Moulded Fan Duct

    V6/Lite6 Injection Moulded Fan Duct

    $2.00

    Out of stock

    If you need to couple a 30mm fan to a 22.3mm cylinder then look no further! The beautiful new E3D v6/Lite6 fan ducts are injection moulded out of translucent blue and red polycarbonate. They are much harder wearing than printed parts and because they are manufactured to tighter tolerances they are significantly less prone to vibration. These ducts are not compatible with v5 HotEnds. This duct is available for download as an STL on Thingiverse. Thing:340312. - See more at: http://e3d-online.com/Spares/v6-Injection-Moulded-Fan-Duct#sthash.i8mNTj1R.dpuf Learn More
  10. PTFE Liner for E3D-V6 and E3D Lite6 1.75mm Hot End 100mm Long

    PTFE Liner for E3D-V6 and E3D Lite6 1.75mm Hot End 100mm Long

    $4.00

    100mm long 1.75mm PTFE Liner for the E3D-V6 and E3D Lite6 1.75mm hot ends

    Learn More

Items 1 to 10 of 27 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction