v6 Extra Nozzle - Hardened Steel - 3mm x .40mm

v6 Extra Nozzle - Hardened Steel - 3mm x .40mm

Be the first to review this product

Availability: In stock

$22.95
  • OR

    Quick Overview

    Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.


     


    If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.


     


    We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.


     


    Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.


     


    Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!


     


    - See more at: http://e3d-online.com/E3D-v6/Extra-Nozzles/V6-Nozzle-Hardened-Steel-1.75mmx0.4mm#sthash.UdZ7Buwo.dpuf

    v6 Extra Nozzle - Hardened Steel - 3mm x .40mm

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views

    Details

    Incredibly wear resistant, hardened steel nozzle for printing abrasive materials without wear.

     

    If you print carbon fibre filled, or other abrasive materials this is the nozzle you need! Carbon filled filaments will cause rapid and significant damage to standard nozzles. Don’t fear however! We’ve developed these new, incredibly wear-resistant nozzles that basically eliminate wear. A standard E3D-v6 Brass nozzle will be significantly worn by printing just 250g of carbon fibre material, that means you could get through 3 nozzles with a single spool of material! However these new nozzles will not wear out, even in extended use with very abrasive materials. You can read more about it in our Blog Post.

     

    We took our standard nozzle design, and applied some material science. By changing from brass to a carefully selected steel, and then post-processing that steel nozzle with a combination of thermal and chemical treatments we can create an extremely hard and wear resistant nozzle.

     

    Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you’ve printed a single spool of abrasive filament you’re saving money. It also saves a lot of time as you won’t be constantly replacing worn out nozzles. Furthermore you’ll be future-proofed for upcoming materials, we think these nozzles should be able to handle just about anything the material manufacturers think of next.

     

    Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn’t affect function, any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!

     

    - See more at: http://e3d-online.com/E3D-v6/Extra-Nozzles/V6-Nozzle-Hardened-Steel-1.75mmx0.4mm#sthash.UdZ7Buwo.dpuf

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.