Hexagon Hot End Parts

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. 100k

    100k Thermistor

    $2.00

    A 100k thermistor, useful for sensing hotend and heatbed temperature. 

    Options:

    No Install Kit (EPCOS 100k Thermistor)

    • Contains a bare wired EPCOS 100k Thermistor

    Fully Assembled Thermistor (Plug and Play) With Quick Disconnect 100mm from Thermistor (EPCOS 100k Thermistor) 

    • Fully Assembled EPCOS 100k Thermistor with 1M long wires, a quick disconnect 100mm From the thermistor, uses High Temp Sleeving to insulate the wires and a connector labeled with THERM to connect to your electronics.

     

    EPCOS 100k Thermistor is used in the Hexagon, Magma and Jhead hot end

    Learn More
  2. .4mm Hexagon Nozzle for 1.75mm Filament

    .4mm Hexagon Nozzle for 1.75mm Filament

    $6.95

    Out of stock

    .4mm Hexagon Nozzle for 1.75mm Filament* Not compatible with the Hexagon hot end for 3mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  3. .4mm Hexagon Nozzle for 3mm Filament

    .4mm Hexagon Nozzle for 3mm Filament

    $6.95

    Out of stock

    .4mm Hexagon Nozzle for 3mm Filament* Not compatible with the Hexagon hot end for 1.75mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  4. Hexagon Wrench

    Hexagon Wrench

    $2.50

    Hexagon Wrench Learn More
  5. Hexagon Heater Block Insulating Boot

    Hexagon Heater Block Insulating Boot

    $9.00

    Out of stock

    Hexagon Heater Block Insulating Boot Not compatible with the AO hexagon Learn More
  6. .3mm Hexagon Nozzle for 3mm Filament

    .3mm Hexagon Nozzle for 3mm Filament

    $6.95

    Out of stock

    .3mm Hexagon Nozzle for 3mm Filament* Not compatible with the Hexagon hot end for 1.75mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  7. .5mm Hexagon Nozzle for 3mm Filament

    .5mm Hexagon Nozzle for 3mm Filament

    $6.95

    Out of stock

    .5mm Hexagon Nozzle for 3mm Filament* Not compatible with the Hexagon hot end for 1.75mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  8. .5mm Hexagon Nozzle for 1.75mm Filament

    .5mm Hexagon Nozzle for 1.75mm Filament

    $6.95

    .5mm Hexagon Nozzle for 1.75mm Filament* Not compatible with the Hexagon hot end for 3mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  9. .3mm Hexagon Nozzle for 1.75mm Filament

    .3mm Hexagon Nozzle for 1.75mm Filament

    $6.95

    Out of stock

    .3mm Hexagon Nozzle for 1.75mm Filament* Not compatible with the Hexagon hot end for 3mm Filament Before you remove your nozzle heat the hot end up to operating temperature (225c) or you may break your nozzle. Learn More
  10. 24v 30W Ceramic Heater Cartridge for Hot Ends

    24v 30W Ceramic Heater Cartridge for Hot Ends

    $4.50

    Specs: Current: 24v Power output: 30W Core: Ceramic Diameter: 6mm Length: 23mm Wire Length: 100cm Learn More

Items 1 to 10 of 14 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction