12v/29A Meanwell Power Supply

12v/29A Meanwell Power Supply

Be the first to review this product

Availability: In stock

Only 1 left

$48.00
  • OR

    Quick Overview

    This ultra low profile Power Supply delivers 12 Volts with 29 Amps. This is the ideal Power Supply for most electronic setups.

    "This Power Supply is a solid 12V power source for your projects!"

    Product Details
    Qty. 1
    12V/29A
    215mm(~8.50") x 115mm(~4.5") x 30mm(~1.25")
    Voltage select switch 110V - 220V
    2 DC Outputs
    Built-in Cooling Fan
    85% Efficiency
    UL 60950-1 Approved
    Pro-tip: You can easily mount this unit using Single L Brackets and M4 Socket Head Cap Screws.

    The fan is temperature controlled. It only turns on when the PSU internals heat up above 50degC and then turns back off once the internals fall below 40degC again.

    Warning - Be sure to disconnect power before attempting to to switch voltage. Power Supply should always be unplugged while you make the connections and also make sure the shield is in place before plugging the cord into an outlet.
    Warning - high voltage! Always have a qualified electrician connect this unit. Use at your own risk!

    12v/29A Meanwell Power Supply

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views

    Details

    This ultra low profile Power Supply delivers 12 Volts with 29 Amps. This is the ideal Power Supply for most electronic setups. "This Power Supply is a solid 12V power source for your projects!" Product Details Qty. 1 12V/29A 215mm(~8.50") x 115mm(~4.5") x 30mm(~1.25") Voltage select switch 110V - 220V 2 DC Outputs Built-in Cooling Fan 85% Efficiency UL 60950-1 Approved Pro-tip: You can easily mount this unit using Single L Brackets and M4 Socket Head Cap Screws. The fan is temperature controlled. It only turns on when the PSU internals heat up above 50degC and then turns back off once the internals fall below 40degC again. Warning - Be sure to disconnect power before attempting to to switch voltage. Power Supply should always be unplugged while you make the connections and also make sure the shield is in place before plugging the cord into an outlet. Warning - high voltage! Always have a qualified electrician connect this unit. Use at your own risk!

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.